Products Categories

Kobra Departmental

 

A departmental shredder is a high-capacity, floor-standing document shredder designed to serve a shared team or department of 12 to 20 users from a central shredding point, handling volumes that exceed what large office models can sustain in daily shared use. Kobra departmental shredders are manufactured in Italy, feature 24-hour continuous duty motors, and are available in two distinct configurations: a high-volume P-2 strip-cut model for general document disposal and a P-6 micro-cut model for classified or top-security destruction. DigiShred supplies both models to South African businesses.

Key facts:

  1. Sheet capacity: 18 to 20 sheets (410TS HS) and 60 to 62 sheets (400 S5) per pass
  2. Security levels: P-2 strip-cut (400 S5) and P-6 micro-cut (410TS HS)
  3. Bin volume: 200 litres (400 S5) and 205 litres (410TS HS)
  4. Entry width: 400 mm (400 S5) and 410 mm (410TS HS)
  5. Suited for: 12 to 20 users at a designated departmental shredding station
Model Sheet Capacity Security Level Shred Size Bin Volume Best For
Kobra 400 S5 60 to 62 sheets P-2 strip-cut 5.8 mm 200 litres High-volume general disposal, 15 to 20 users
Kobra 410TS HS 18 to 20 sheets P-6 micro-cut 0.8 x 9.5 mm 205 litres Classified document destruction, 12 to 15 users

 

Who Uses Kobra Departmental Shredders?

Kobra departmental shredders are built for teams of 12 to 20 people who share a single, centrally located machine and shred regularly throughout the working day. These aren’t desk-side units; they sit at a designated shredding station and handle the combined disposal needs of an entire floor, department, or division.

The two models in this range serve different environments despite both fitting the departmental category. The 400 S5 handles speed and volume, ideal for departments with high throughput and standard confidentiality requirements. The 410TS HS handles top-security destruction where document reconstruction must be made practically impossible, producing particles so small that 10,000 micro-chips can come from a single A4 sheet.

 

Departments and environments that typically use Kobra departmental shredders:

  1. Corporate administration departments managing daily bulk disposal of internal documents and correspondence
  2. Human resources teams handling personnel files, payroll records, and recruitment documentation at scale
  3. Finance and accounting departments disposing of invoices, bank statements, and client financial records
  4. Legal offices requiring regular high-volume destruction of case files, contracts, and court documents
  5. Government departments and public sector offices with both high-volume and classified document disposal needs
  6. Defence, intelligence-adjacent, or regulatory bodies requiring P-6 certified micro-cut destruction
  7. Healthcare administration teams disposing of patient records in line with POPIA obligations

 

How Much Do You Need to Shred Per Day to Choose a Kobra Departmental Shredder?

Kobra departmental shredders are the right fit when a team of 12 or more people shares one machine and daily shredding volume consistently exceeds what a large office model can handle without overheating or slowing down. The 400 S5 handles this through sheer sheet capacity; the 410TS HS handles it through continuous-duty operation at a higher security level.

 

Volume tier Recommended model Notes
Under 500 sheets per day, general documents Kobra Large Office Step down, fewer users, lower throughput
500 to 2,000 sheets per day, general disposal Kobra 400 S5 60 to 62 sheets per pass, 15 to 20 users
500 to 2,000 sheets per day, classified documents Kobra 410TS HS 18 to 20 sheets per pass, P-6 micro-cut
Over 2,000 sheets per day Kobra Heavy Duty Step up, higher throughput needed

 

What Are the Key Features of Kobra Departmental Shredders?

Both Kobra departmental models share a 24-hour continuous duty motor, chain gear drive system, automatic start-stop, automatic reverse for jam clearance, and carbon-hardened cutting knives, making them reliable workhorses for high-use shared environments with no cooldown interruptions. All Kobra shredders are manufactured in Italy and carry a 1-year machine warranty with an extended blade guarantee.

 

Shared features across both models:

  1. 24-hour continuous duty motor: no duty cycle limitations, runs all day without overheating
  2. Chain gear drive system: heavy-duty metal gearing for consistent performance under sustained load
  3. Automatic start-stop via electronic eyes: starts when paper is inserted, stops when the feed is clear
  4. Automatic reverse system: clears jams automatically without operator intervention
  5. Carbon-hardened cutting knives: long service life under high-volume daily use
  6. Energy Smart standby: drops to near-zero power consumption when not in use
  7. Safety stop: halts automatically if the bin is full or a door is open
  8. Made in Italy: 1-year warranty, extended blade guarantee

 

Feature differences between models:

Kobra 400 S5:

  1. P-2 strip-cut at 5.8 mm: fast, high-volume destruction suited to general internal documents
  2. 60 to 62 sheets per pass: the highest manual sheet capacity in the Kobra departmental range
  3. 400 mm entry width: accommodates A3 and oversized documents in landscape
  4. Also shreds: credit cards, CDs, DVDs, staples, and paper clips
  5. 200 W motor, 2100 W total power draw
  6. Best for: volumes where speed matters more than particle security level

 

Kobra 410TS HS:

  1. P-6 micro-cut at 0.8 x 9.5 mm: destroys a single A4 sheet into approximately 10,000 particles
  2. 18 to 20 sheets per pass: lower capacity reflecting the intensity of micro-cut destruction
  3. Touchscreen display: operational control via touch panel rather than standard buttons
  4. 410 mm entry width with 205-litre bin
  5. Also shreds: credit cards, CDs, DVDs, floppy disks, and film
  6. 2600 W power draw
  7. Best for: classified, regulated, or legally sensitive document destruction where reconstruction is unacceptable

 

When Should You Step Up or Step Down from the Kobra Departmental Range?

Kobra departmental shredders sit between the large office and heavy duty tiers in the Kobra range, serving teams of 12 to 20 users at a central shredding point. Step down if your team is smaller or your volume is lower; step up if daily throughput is pushing the 400 S5 to its limits.

 

Step down to Kobra Large Office if:

  1. Your team has fewer than 12 regular users sharing the machine
  2. Daily volume is manageable within a 25 to 40 sheet per pass large office model
  3. The departmental footprint is too large for your available floor space

 

Stay in the Kobra Departmental range if:

  1. Your department has 12 to 20 regular users shredding throughout the day
  2. You need a 200-litre bin to avoid constant emptying in a shared environment
  3. Your security requirement is either P-2 general disposal (400 S5) or P-6 classified destruction (410TS HS)
  4. The machine sits at a dedicated shredding station rather than beside a desk

 

Step up to Kobra Heavy Duty if:

  1. Daily volume regularly exceeds what the 400 S5 can manage within normal working hours
  2. More than 20 users share the machine and the bin empties more than twice per day
  3. You need a higher throughput machine that still fits within an office environment

 

Frequently Asked Questions

What is a Kobra departmental shredder?

A Kobra departmental shredder is a high-capacity, floor-standing document shredder designed for shared use by teams of 12 to 20 people at a central shredding station, with a continuous duty motor built for sustained daily operation without overheating. Kobra manufactures these machines in Italy to DIN 66399 security standards, with models available in P-2 strip-cut for high-volume general disposal and P-6 micro-cut for classified document destruction.

 

What security level do I need for POPIA compliance in a shared departmental environment?

For documents containing personal information, such as employee records, client data, or financial records, DigiShred recommends a minimum of P-4 cross-cut. The Kobra 400 S5 at P-2 strip-cut is not suitable for POPIA-sensitive documents on its own; if your department handles personal information, the Kobra 410TS HS at P-6 micro-cut far exceeds the minimum requirement and provides the highest available standard of destruction at this capacity level.

 

What is the difference between the Kobra 400 S5 and the Kobra 410TS HS?

The 400 S5 is a P-2 strip-cut shredder handling 60 to 62 sheets per pass at 5.8 mm strips, built for maximum throughput on general documents where speed matters more than particle size. The 410TS HS is a P-6 micro-cut shredder handling 18 to 20 sheets per pass at 0.8 x 9.5 mm particles, destroying each A4 sheet into approximately 10,000 unreadable micro-chips, and is suited to classified or legally sensitive destruction where reconstruction must be impossible.

 

How do I choose the right Kobra departmental shredder for my organisation?

The decision comes down to security level first, then volume. If your department shreds general internal documents, correspondence, and draft paperwork where POPIA sensitivity is low, the 400 S5 handles the volume faster. If you shred personnel records, client data, legal documents, or anything requiring P-4 or above under POPIA, the 410TS HS is the correct choice despite its lower per-pass sheet count.

 

Can Kobra departmental shredders run all day without stopping?

Both the Kobra 400 S5 and the Kobra 410TS HS use 24-hour continuous duty motors with no duty cycle, meaning they can operate throughout a full working day without the cooldown periods that smaller office shredders require. The chain gear drive system and carbon-hardened cutting knives are specifically engineered for sustained high-volume use, making both models suitable for departments that shred consistently from morning to close of business.